Precision Motor Control Panels
Adgo engineers and manufactures custom motor control panels and cabinets that keep your equipment performing reliably.
Get designs matched to your requirements and application
Count on UL-certified code-compliant panels
Be supported from design through startup and beyond
Motor Control Problems Slow Down More Than the Motor
- Are you dealing with off-spec motor control cabinets that require rework before they can be installed?
- Has a previous integrator left you with panels that trip nuisance faults or underperform under load?
- Are you spending more time managing vendor problems than managing your project?
When your motor control cabinets aren’t designed reliably, your entire operation feels it. Adgo builds systems right the first time, so you’re not managing someone else’s mistakes.
An Experienced Motor Control Partner You Can Actually Count On
We know what’s at stake when a motor control panel doesn’t perform: missed timelines, failed inspections and equipment that can’t run the way it was designed to.
As a UL 508A-certified panel shop with nearly seven decades of experience, Adgo designs and fabricates motor control panels and cabinets for industrial, municipal and OEM applications. Our engineer-led team handles design, fabrication, VFD and soft starter programming and on-site commissioning entirely in-house. No handoffs. No gaps. No surprises at startup.
- Proven Technical Expertise
- Electrical, Chemical and Process Engineers In-House
- CSIA Member
Our Motor Control Panels
Relay Logic Motor Control Panels
Dependable hardwired control for straightforward motor applications
VFD-Integrated Motor Control Panels
Precise speed control and energy savings built into a single, tested enclosure
Soft Starter Motor Control Panels
Smooth motor starts that protect your equipment and reduce mechanical wear
PLC-Based Motor Control Cabinets
Intelligent motor control with the flexibility to grow with your process
Custom Multi-Motor Control Systems
Coordinated control of multiple motors from a single, engineered system
Your Bottom Line On Time
Every missed deadline, botched submittal or out-of-spec panel doesn’t just delay your project. It costs you money, credibility and the trust of the people counting on you. Too many integrators overpromise during the bid and underdeliver on the shop floor. By the time you realize it, you’re managing their mistakes instead of running your job.
What Our Customers Say
“Adgo does it all – design, fabrication, programming… They’re a one-stop shop. They’ve learned our industry, and bring new ideas and thoughts to it. They’re a good partner.”
Brian B., director of engineering, manufacturing distributor
“For more than 20 years, Adgo has been our trusted controls integration partner. Their technical depth, responsiveness, and consistency make them an invaluable extension of our engineering team.”
Mike G., president, OEM customer
“Adgo is very easy to work with. They go above and beyond to assist with anything I need.”
Deblene H., project manager, security solutions customer
The Wrong Partner Costs More Than the Project
Using off-the-shelf industrial control systems or a vendor who disappears after install isn’t just another frustration; more often than not, it’s a long-term liability. Downtime, rework, and scope gaps quickly compound into a long-term liability and the cost. Adgo clients get a team who are responsible from that first call, all the way through with constant service.
It’s not a promise. It’s our track record.
The “Simplify Your Process” Plan
1
Provide us with plans, specs or an overview of your requirements.
2
Get custom-engineered solutions backed by expert support.
3
Move forward with a fully commissioned system tailored to your needs.
Frequently Asked Questions
About Motor Control Panels and Motor Control Cabinets
A motor control panel is an electrical enclosure that houses the components needed to start, stop, protect and control one or more electric motors. Depending on the application, a motor control cabinet may include circuit breakers, contactors, overload relays, variable frequency drives (VFDs), soft starters and PLC-based logic for automated sequencing.
A motor control panel typically manages a defined set of motors or a single process. It’s custom-engineered for a specific application. A motor control center (MCC) is a standardized assembly of multiple motor starters in a common enclosure, commonly used in large industrial facilities. Adgo builds both, depending on your system requirements.
Adgo designs and fabricates a full range of panels, including relay logic panels, VFD-integrated panels, soft starter panels, PLC-based motor control cabinets and custom multi-motor control systems. We engineer each panel to meet your specific load requirements, environmental conditions and operational needs.
Yes. Adgo is a UL 508A-certified panel shop. Every motor control panel we fabricate is built to UL 508A standards, ensuring your panels meet NEC compliance requirements and pass inspection without last-minute surprises on the job site.
Yes. VFD configuration and commissioning are core Adgo services. Our engineers specify, configure, program and commission variable frequency drives and soft starters from leading manufacturers, including Rockwell Automation, Schneider and others. We integrate them directly into your motor control cabinet as part of a complete, tested system.
Adgo serves a broad range of industries, including water and wastewater, industrial manufacturing, food and beverage, agriculture, energy, refractory, steel and transportation. If your operation runs motors, we have experience building control panels for it.
Lead times vary depending on panel complexity, component availability and project scope. Adgo provides realistic schedule commitments during the proposal phase and maintains transparent communication throughout fabrication. Our in-house engineering and manufacturing capabilities minimize handoffs and help keep your project on schedule.
Yes. Adgo provides full startup and commissioning services. Our team can perform factory acceptance testing (FAT) at our Cincinnati facility before shipment, and travel on-site to commission the system in the field. We are committed to ensuring your motor control panels perform exactly as designed from day one.
Relay logic panels use hardwired contactors and relays to control motor operation; they’re reliable, straightforward and cost-effective for simple applications. PLC-based motor control panels use programmable logic controllers to execute complex sequences, communicate with other systems and support remote monitoring. Adgo engineers both, and we can help you determine which approach best fits your process requirements and budget.
Yes. Adgo supports our customers beyond the initial install. Whether you need troubleshooting, programming updates, modifications to accommodate process changes or spare parts guidance, our team remains available after commissioning. Ongoing support is part of what makes Adgo a long-term partner, rather than a one-time vendor.
Ready for Industrial Control Systems Built Exactly to Spec?
Stop settling for integrators who miss the mark.
Partner with Adgo: a UL-certified manufacturer and systems integrator supplying custom control panels and industrial automation solutions that function from day one.