Custom Electrical Control Panel Fabrication, Built to Your Exact Specs
From relay logic to power distribution, Adgo designs and builds UL-certified electrical control panels that ship tested and ready to perform.
Get panels engineered to spec the first time
Rely on UL 508 and UL 698 certified fabrication
Ship panels factory-tested and fully documented
Are Off-Spec Panels Slowing Your Projects Down?
- Are you getting panels that arrive incomplete, mislabeled or wired to the wrong revision?
- Have other panel shops promised a deadline and then gone quiet when things got complicated?
- Are you managing multiple vendors just to get one electrical control panel through to installation?
- Does navigating UL compliance feel like it falls entirely on your team?
You deserve a panel shop that takes full ownership of the scope. Adgo can help.
A UL-Certified Panel Shop That Owns the Whole Scope
When your project depends on panels that are built right the first time, you need more than a fabricator — you need an engineering partner. Adgo has been designing and building custom electrical control panels for 69+ years. Our engineer-led team handles every stage in-house: design, fabrication, UL compliance, wiring, testing and documentation. No handoffs. No finger-pointing. One vendor accountable from drawing to delivery.
- UL 508A and UL 698A Certified Panel Shop
- Rockwell Silver Systems Integrator
- 30,000-Square-Foot Manufacturing Facility
Your Bottom Line On Time
Every missed deadline, botched submittal or out-of-spec panel doesn’t just delay your project. It costs you money, credibility and the trust of the people counting on you. Too many integrators overpromise during the bid and underdeliver on the shop floor. By the time you realize it, you’re managing their mistakes instead of running your job.
What Our Customers Say
“Adgo does it all – design, fabrication, programming… They’re a one-stop shop. They’ve learned our industry, and bring new ideas and thoughts to it. They’re a good partner.”
Brian B., director of engineering, manufacturing distributor
“For more than 20 years, Adgo has been our trusted controls integration partner. Their technical depth, responsiveness, and consistency make them an invaluable extension of our engineering team.”
Mike G., president, OEM customer
“Adgo is very easy to work with. They go above and beyond to assist with anything I need.”
Deblene H., project manager, security solutions customer
The Wrong Partner Costs More Than the Project
Using off-the-shelf industrial control systems or a vendor who disappears after install isn’t just another frustration; more often than not, it’s a long-term liability. Downtime, rework, and scope gaps quickly compound into a long-term liability and the cost. Adgo clients get a team who are responsible from that first call, all the way through with constant service.
It’s not a promise. It’s our track record.
The “Simplify Your Process” Plan
1
Provide us with plans, specs or an overview of your requirements.
2
Get custom-engineered solutions backed by expert support.
3
Move forward with a fully commissioned system tailored to your needs.
Frequently Asked Questions
About Electrical Control Panel Fabrication
An electrical control panel is an enclosure that houses the electrical components used to control, protect and distribute power and signals within an industrial, commercial or infrastructure system. Depending on the application, this can include circuit breakers, relays, terminal blocks, contactors, power supplies, PLCs and HMIs. Adgo designs and fabricates custom electrical control panels built to your exact specifications and UL-certified to the applicable standard.
UL 508A is the standard for industrial control panels used in general-purpose environments. UL 698A covers control panels designed for hazardous locations — specifically environments where flammable gases, vapors or combustible dust may be present. Adgo is certified to build panels to both standards, including Class I Division 1 and Division 2 classified area panels.
Yes. We offer full build-to-print capability. Provide your drawings, schematics and bill of materials and we’ll fabricate the panel exactly as specified. If your drawings need engineering review or refinement before fabrication, our in-house team can work through that with you as well.
We fabricate a wide range of custom electrical control panels including power distribution panels, relay logic panels, terminal cabinets, motor control panels, PLC panels, pump control panels, OEM production panels, and hazardous location enclosures. If it involves electrical control, we can engineer and build it.
As a UL-listed panel shop, Adgo is authorized to apply the UL label to panels we build to UL 508A and UL 698A standards. Our shop follows UL-prescribed construction requirements, uses approved components and maintains the documentation required to support field inspection. Every panel we ship is built to the correct standard and labeled accordingly — no third-party listing service required.
Yes. Every panel goes through a factory acceptance test (FAT) before it leaves our facility. We verify wiring, I/O, logic and communications against the design package. If commissioning support is required on-site after delivery, we offer that as well.
Lead time varies depending on panel complexity, component availability and current production volume. Simple relay logic and terminal cabinet builds typically turn faster than multi-panel systems with integrated PLC programming and SCADA. Contact us with your project details and we’ll give you a realistic schedule.
Adgo does both. Our engineer-led team handles design, drawing development, UL compliance, fabrication, wiring, testing and commissioning — all in-house. You don’t need a separate engineering firm to design the panel and a separate shop to build it. We manage the full scope under one roof.
A set of drawings, a specification, a one-line diagram, or even a description of what you need to control is enough to get the conversation started. Our team will ask the right questions, identify any gaps and come back with a proposed scope and timeline. The first step is a meeting — reach out and we’ll get it on the calendar.
Ready for Industrial Control Systems Built Exactly to Spec?
Stop settling for integrators who miss the mark.
Partner with Adgo: a UL-certified manufacturer and systems integrator supplying custom control panels and industrial automation solutions that function from day one.